12/31/2022 0 Comments Usb to ide & sata cableThe hard drive adapter requires power from your system's USB port. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name. Right-click the first USB Root Hub device and select Properties.Ĭlear the box next to Allow the computer to turn off this device to save power. On your desktop, right-click the My Computer icon and select Properties.Įxpand Universal Serial Bus controllers by clicking the arrow to the left of it. Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.Ĭlick the Start button and select Control Panel. On your keyboard, press the Windows key + X and select Control Panel.Ĭlick Hardware and Sound, then click Power Options.Ĭlick Change plan settings for the plan you want to change.Ĭlick the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled. The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening. Anyone connected to the internet knows how easily a virus or trojan can wipe out a perfectly working computer almost instantly.If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. This has saved my bacon so to speak many times. That way, I can always go back to the original setup. Whenever I get a new computer, I always remove the drive and create a complete backup before using it. Before doing any operations on system files, use your backup software to create a complete image of your hard drive just in case you goof something up. This allows great flexibility because you can modify/repair Windows system files and user data. You can also access files that would normally be locked by Windows. If you plug a drive into the usb to ide adapter that was used to boot a pc, you can now use disk utilities to fix the problem(s). Your usb to ide adapter can also be used to diagnose problematic Windows installations. Any regular drive function can be performed via the usb interface. You can also reformat the drive if you want. From the file explorer, you can now copy and delete files. Windows will assign a drive letter to a drive that is already formatted. Eventually, if all is well, you will get a message saying that the device is ready to use. In the lower right corner, you will see messages like "Drive Found", or the model number of the drive will flash by. If you are using Windows XP, you will hear a po-dink sound as the adapter is recognized. There will be some gentle clicking and whirring sounds. Plug in the power supply for the adapter. Once all the connections to the drive are complete, plug the cable into any available usb port on your computer. This is very simple because the connectors are shaped differently and mixing them up is not possible. Once you have the adapter plugged in, you must also plug the power cable into the connector next to the data cable. Some Western Digital drives require you to remove the jumper entirely. There is a picture on the label that shows you where to put the jumper. You accomplish this by setting the jumper on the drive. Hard drives also need to be set to master or single drive mode. You simply plug the IDE connector into the device you want to access. The adapter has an IDE connector on one side and the other side has a usb connector. How do I use this adapter? I am glad you asked. Simply put, it translates the IDE commands and data to usb format for the PC to access the device without installing it physically in the computer. Anyway, a usb to ide adapter is a device that connects to a hard drive or CD/DVD and allows you to access them via a computer's usb port. What is a usb to ide adapter? First off, let me start by saying that there are usb to ide/sata adapters out there that support IDE and SATA drives, but for sake of brevity, I will refer to them generically as usb to ide adapters. How many times have you needed to take the data from an old hard drive? What a hassle it is to open up the computer and add the drive just to get some data off it. As a computer user, you need a way of transferring data from one computer to another.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |